Service division · Kunovice
Avionics Integration Engineer (senior)
Czech title: Inženýr integrace avioniky (senior)
CZK 74,000–95,000 gross per month, by experience
- Location
- Letecká 1723, Kunovice
- Contract
- Employment (HPP), full-time
- Start
- By agreement; from outside the EU, a few months for the EU Blue Card
- Workload
- Full-time
We reply to every application, usually within two weeks.
You hold an engineering degree in electronics or avionics, and you have spent years where things get built and measured: a test station, a repair centre, a production line or an avionics shop. In our Kunovice hangar you turn upgrade projects into installations that work. You design the wiring and the electrical load analysis, build test benches, configure and test the systems, find difficult faults by measurement and prepare the data our design office needs for approval. If you're moving from outside the EU, we employ you on an EU Blue Card.
What you'll work on
No wiring diagram? That's a normal Monday. Many of our aircraft are older, and their wiring has been changed over the years. You work out what is really there and design the new installation from it.
- Garmin GTN Xi navigators and G500/G600 TXi displays
- G5 and GI 275 electronic instruments
- GFC 500/600 autopilots
- Transponders and ADS-B
- NVG-compatible lighting and mission systems on special-mission aircraft
- Test benches and demo stations for new installations
What you will do
- Installation design: wiring diagrams, interfaces, power, grounding and the electrical load analysis for each upgrade, from the installation manuals and the aircraft as it really is.
- Data for approval: the drawings, test procedures and reports our design office needs for an STC or a minor change.
- Test benches: build and run bench set-ups to configure and prove a system before it goes into the aircraft.
- Difficult faults: find the cause by measurement, on the aircraft and on the bench, and take the technicians through it.
- Mentoring: check the work of our integration technicians and help them grow.
What we expect
- Engineering degree: a university degree in electronics, avionics or electrical engineering, or a higher technical diploma of at least three years.
- Built and measured: several years in testing, repair, integration or production of avionics or comparable electronics; you read and draw wiring diagrams.
- Avionics interfaces: ARINC 429, RS-232/422, analogue and discrete signals, and RF basics.
- Technical English: enough to read manuals and wiring diagrams accurately and to work in English in the hangar.
- Precision and discipline: you work carefully, and never treat quality or safety as a formality.
Nice to have
- An EASA Part-66 B2 licence, or modules you have already passed
- Garmin GTN Xi, G500/G600 TXi, GFC 500/600 or comparable systems
- Experience with STC or minor change data
- Electrical CAD software (for example AutoCAD Electrical, EPLAN or E3)
What we offer
- CZK 74,000–95,000 gross per month on a full-time employment contract, by experience
- From outside the EU, we employ you on an EU Blue Card and go through the application with you; you never pay a recruitment fee
- Your EASA Part-66 modules as a benefit: we pay for them; in return, you stay with us for three years after you receive the licence
- Work between the hangar and our EASA design office, from GTN Xi upgrades to mission systems
- A Part-145 hangar at Kunovice airport (LKKU), equipped for avionics and maintenance
Employee benefits: 5 weeks of vacation and 3 sick days, leisure benefit (Pluxee, MultiSport), meal allowance of 129 CZK. All benefits
About AIR TEAM
AIR TEAM service is an EASA Part-145 maintenance organisation for avionics installation, component repair and aircraft maintenance. The hangar is at Kunovice airport (LKKU); the avionics lab is in Veverská Bítýška, near Brno. Across the group, AIR TEAM has modified more than 100 aircraft for European defence programmes and is developing its own counter-drone system.
The role sits between the hangar and AIR TEAM Engineering, our EASA design organisation, which gets the modifications approved.
Avionics Integration Engineer (senior)
CZK 74,000–95,000 gross per month, by experience
How to apply
Send a short message through the form with your CV or LinkedIn, and up to three photos or drawings of an installation, test bench or wiring diagram you did yourself, with a line on what problem it solved. Tell us your degree, which licence you hold (if any) and, if you would move from abroad, from which country. The hangar works in Czech and English, and the documentation is in English.
Other open roles
All careers and benefits →Service division
Avionics Contractor, EASA B2 (work orders)
Monthly estimate CZK 77,000–110,000, priced per work order; you invoice
As an independent B2 technician on a trade licence, take on avionics installation work orders in our Part-145 hangar, from Garmin GTN Xi upgrades to autopilots and mission systems.
- Location
- Kunovice
- Contract
- Contractor (IČO), per work order
- Start
- Start: By agreement
Service division
Avionics Integration Technician (relocation)
CZK 57,000–64,000 gross per month; more once you hold an EASA B2 licence
For avionics technicians and electronics engineers from outside the EU: you plan and prove avionics installations in our Part-145 hangar in Kunovice, from wiring diagrams and as-built records to configuration and tests. Employment contract, and we pay for your EASA Part-66 modules.
- Location
- Kunovice
- Contract
- Employment (HPP), full-time, with a Czech employee card
- Start
- Start: About six months from the offer (work permit)
Service division
Avionics Bench Technician (component repair)
CZK 46,000–64,000 gross per month; CZK 74,000–95,000 at senior level
Repair avionics units, instruments and radios in our Part-145 laboratory near Brno, down to the component: find the faulty part by measurement, replace it and test the unit to the manufacturer's manual. No aviation background or licence needed; electronics is what counts.
- Location
- Veverská Bítýška
- Contract
- Employment (HPP), full-time
- Start
- Start: By agreement
Marketing division
Performance & Growth Marketing Specialist / Lead
Fixed monthly fee CZK 55,000–75,000 for the agreed scope; CZK 75,000–100,000 at lead level; you invoice
Run our marketing as one system: shop campaigns, promotions, a monthly newsletter and leads for the service, in seven languages, with an AI agent doing the drafting. An aviation background is a must. B2B contract only. You apply with a short assignment instead of a CV.
Task instead of a CV
- Location
- Veverská Bítýška
- Contract
- B2B contract (IČO)
- Start
- Start: Immediately or by agreement
Finance
Chief Accountant (Czech-speaking)
CZK 65,000–85,000 gross per month, plus quarterly bonuses
Own the books of several group companies: month-end and year-end closes, VAT, corporate tax and payroll in Pohoda and Pamica. Czech required; the role page is in Czech.
Page in Czech
- Location
- Veverská Bítýška
- Contract
- Full-time (HPP)
- Start
- Start: By agreement
Production
Production Technician (Wet Lay-Up, MAV/UAV)
Wet lay-up and MAV/UAV airframe assembly on site in Moravská Třebová. Start planned for January 2027.
- Location
- Moravská Třebová
- Contract
- By agreement
- Start
- Start: January 2027
Design
CAD Engineer (UAV, CATIA V5)
CZK 80,000–140,000 per month for the agreed scope, by seniority; you invoice
CAD for a new defence UAV programme: parts, assemblies and manufacturing drawings in CATIA V5. Remote.
- Location
- Remote
- Contract
- B2B contract (you invoice us)
- Start
- Start: By agreement