
AIR TEAM Engineering (Jet Concept)
Who we are
Aircraft design, certification and production.
AIR TEAM Engineering is the design office of AIR TEAM, based in Kaunas, Lithuania. Its legal entity, Jet concept UAB, holds the EASA Part 21J design organisation approval EASA.21J.849.
We design changes to aircraft cabins, avionics and exteriors and get them approved. AIR TEAM makes the parts under its Part 21G approval CZ.21G.0075, and the hangar at Kunovice can fit them under Part-145.

What we do
Design, certification, production and integration.
Four parts of one job. Each card opens the detailed pages.
Design
Cabin layouts, monuments, lavatories, livery and placards, drawn as approved design data.
Learn more →Certification
We classify the change and approve minor changes in-house. Major changes and STCs follow the EASA route.
Learn more →Production
Parts, kits and decals made to the approved data under AIR TEAM's Part 21G approval and released with EASA Form 1.
Learn more →Integration
Avionics and cabin systems designed into your aircraft: the installation, the interfaces and the approved data.
Learn more →

Design: VIP cabin interior

Production: equipment mounting bracket

Integration: Boeing 737 flight deck
Capabilities
Every engineering service, in one place.
From STC development to livery. Pick the service you need; each link opens its own page.
Certification
Approved design data for your modification.
Cabin connectivity
SATCOM, Wi-Fi, IFE and cabin power.
Avionics integration design
Flight-deck and mission systems.
Cabin design
LOPA, monuments and placards.
Exterior and livery
Livery and markings as approved data.
Flight test and completions
Programme phases in their own right.
Who we serve
Airliners, business jets and special-mission aircraft.
The design record runs from the ATR 72 to the Boeing 747.
Commercial and regional
Cabin reconfiguration, galleys, seats and in-seat power for Airbus A320 family, Boeing 737, Embraer E190 and ATR fleets.
Cabin design →Business and VIP
Interior components, monuments, curtains and livery for business jet and VIP cabins.
Completions →GA and special missions
Avionics installations, camera and sensor mounts and other certified changes for general aviation and special-mission aircraft.
Avionics installations →
STC and MCA programmes
What the design team has certified.
The engineers in Kaunas have designed and certified airliner cabin, galley, livery and equipment changes since 1996: first as MAC Interiors, then as the design office of Magnetic MRO. The record holds 11 EASA STCs and more than 300 approved changes.
- 10086810Boeing 737-8189-seat cabin layoutMagnetic MRO design office, 2025
- 10083387Embraer ERJ 190-200Cabin reconfiguration with galley G2 and relocated forward stowageMagnetic MRO design office, 2023
- 10081943Embraer ERJ 190-200122-seat cabin layout with in-seat powerMagnetic MRO design office, 2023
- 10080242Airbus A320-214Cabin reconfiguration from 132 seats in two classes to 180 seats in one classMagnetic MRO design office, 2022
- 10070591Boeing 737-800, 747-400, 777-300Stretcher installation (P/N 1123000-050)MAC Interiors design, 2019
- 10063360Boeing 737-800, 747-400, 777-300Stretcher installation (P/N 1120030-310)MAC Interiors design, 2017
- 10044460Boeing 747-400Economy and business class seats with fibre-to-the-screen IFE and in-seat powerMAC Interiors design
- 10032016Airbus A319-133Galleys G1, G2 and G5MAC Interiors design, 2010
- 10028366Airbus A320-232Galley G1 and galley G5 installationMAC Interiors design, 2009
- 10014966Boeing 757-200Galley 1B and forward RH wardrobe installationMAC Interiors design, 2007
- 10014066Boeing 747-400Zone B cabin class dividers, stowage and dogbox; door 2 dividers; upper-deck dogboxMAC Interiors design, 2005
STC numbers as published in the EASA list of supplemental type certificates. Our design team certified them while it worked as MAC Interiors and then as the design office of Magnetic MRO; EASA lists Magnetic MRO AS as the certificate holder.
Approvals
Approved design, production and installation.
The design office works with AIR TEAM's production and its hangar, so a change can go from the first drawing to the released aircraft inside one group.
- Part 21J design organisationEASA.21J.849
Held by Jet concept UAB, the legal entity of AIR TEAM Engineering in Kaunas. Minor changes are approved in-house; major changes and STCs follow the EASA route.
- Part 21G production organisationCZ.21G.0075
AIR TEAM's production approval. Parts, installation kits and markings made to the approved data are released with EASA Form 1.
- Part-145 maintenance organisationCZ.145.0094
AIR TEAM's hangar at Kunovice fits the change and releases the aircraft to service.

Need design data or a certified part?
Send the aircraft, the change or the drawing. We reply within 1 business day.
