Certifications and approvals

Approvals you can check

Every approval below states which AIR TEAM entity may maintain, produce or design what, and each one is issued by an authority or an independent body that audits us. Where we hold the certificate document, you can open it here.

AIR TEAM service, s.r.o.

The approved organisation. It holds the maintenance, production, design-capability and quality approvals, so the release certificate or Form 1 you receive comes from this entity.

EASA Part-145 maintenance
EASA Part-21G production
EASA ADOA (AP496)
Military Part-145
FAA repair station
ISO 9001 and NATO AQAP 2110

AIR TEAM, s.r.o.

The entity to which the Collins Aerospace letter of authorization is issued.

Collins Aerospace authorisation

AIR TEAM group

Design organisation approval EASA.21J.849 is held within the group, with design work carried out by AIR TEAM Engineering in Kaunas. It works alongside the ADOA above.

EASA Part-21J DOA

Certificate documents

The approval documents as issued. Select a card to open the full certificate as a PDF in a new tab.

CZ.145.0094
EASA Part-145 maintenance organisation certificate
AIR TEAM service, s.r.o.
Line and base maintenance: aeroplanes (A1, A2), helicopters (A3) and components (C2, C3, C6, C13).
Validity
Revision 7, 22 April 2026. Unlimited duration while the conditions are met.
Issued by
Issued by Civil Aviation Authority of the Czech Republic
View certificatePDF, 0.6 MB, 3 pages
CZ.21G.0075
EASA Part-21G production organisation approval
AIR TEAM service, s.r.o.
Production of metal and non-metal construction and cable harnesses (category C2), released with EASA Form 1.
Validity
Issued 16 April 2025. Unlimited duration while the conditions are met.
Issued by
Issued by Civil Aviation Authority of the Czech Republic
View certificatePDF, 3.3 MB, 2 pages
EASA.AP496
EASA alternative procedures to DOA (ADOA)
AIR TEAM service, s.r.o.
Demonstrated capability for design of Supplemental Type Certificates, extended to CS-29 rotorcraft.
Validity
EASA finding of compliance, Issue 2, 3 August 2022.
Issued by
Issued by European Union Aviation Safety Agency
View certificatePDF, 0.9 MB, 3 pages
Q 1443 - 2
ISO 9001:2015 quality management certificate
AIR TEAM service, s.r.o.
Maintenance and service of avionics and parts for fixed or rotary wing aircraft, performing modifications.
Validity
Valid until 17 March 2027.
Issued by
Issued by QUALIFORM, a.s., certification body No. 3011
View certificatePDF, 0.3 MB, 1 page
33/2-2024
NATO AQAP 2110 quality system certificate
AIR TEAM service, s.r.o.
Quality system compliance to ČOS 051672 (AQAP 2110) for maintenance and service of avionics and parts for fixed or rotary wing aircraft and for aircraft modifications.
Validity
Valid until 30 April 2027.
Issued by
Issued by Czech Defence Standardization, Codification and Government Quality Assurance Authority
View certificatePDF, 0.3 MB, 1 page
CZE.145.1004
Military Part-145 approval certificate
AIR TEAM service, s.r.o.
Approved organisation for the maintenance of military aviation products and parts and appliances, in the scope of the Maintenance Organisation Exposition-M (VOV-M-2020), chapter 1.9.
Validity
Issued 31 March 2021. Active approval.
Issued by
Issued by Ministry of Defence of the Czech Republic
View certificatePDF, 0.9 MB, 2 pages
Issued August 2025
Collins Aerospace letter of authorization
AIR TEAM, s.r.o.
Authorised Business and Regional Systems Dealer: sale of Collins products and flight line maintenance and installation services for products where training has been completed.
Issued by
Issued by Collins Aerospace, an RTX Business
View certificatePDF, 0.2 MB, 1 page

Copies are published for customer verification. The authority that issued the approval remains the reference, and we confirm current status on request.

What each approval covers

The scope as the authority wrote it into each approval. Send us your aircraft and task and we confirm how they fit.

EASA Part-145: maintenance organisation

CZ.145.0094/AIR TEAM service, s.r.o.

Part-145 is the approval to maintain aircraft and components and to issue the certificate of release to service. It covers line and base maintenance in classes A1, A2 and A3 and a set of component ratings. It does not include A4. Aircraft maintenance is based at Kunovice (LKKU).

A1: aeroplanes above 5 700 kg

Beech 300 Series
Cessna 560 XL

A2: aeroplanes at or below 5 700 kg

Beech 90 Series and Beech 200 Series
Cessna 208 Series (PWC PT6), Cessna 400 Series, Cessna 425 and Cessna 441
Mitsubishi MU-2B
Piper PA-31T Series (PWC PT6), Piper PA-42 (PWC PT6) and Piper PA-46-500TP
Pilatus PC-6 (PWC PT6)
All Group 3 piston-engine aeroplanes (Appendix I to AMC to Part-66)

A3: helicopters

Airbus Helicopters EC135 P3H (PWC PW206) and T3H (Turbomeca Arrius 2B)
Agusta A109 Series (PWC PW206/207, RR Corp 250, Turbomeca Arrius 2)
Agusta AB139 / AW139 (PWC PT6)
Agusta AB206 / Bell 206 Series, Bell 412 / Agusta AB412 Series
Bell 407 (RR Corp 250), Bell 427 and Bell 429 (PWC PW207D), Bell 505 (Safran Arrius 2R)
Robinson R22 / R44 Series

Components: C2, C3, C6, C13

C2 Auto flight, C3 Communications and navigation
C6 Equipment, C13 Indicating and recording systems
Components are those on the capability list ATS-ID-002

Line and base maintenance are both approved for every aircraft class above.

EASA Part-21G: production organisation approval

CZ.21G.0075/AIR TEAM service, s.r.o.

A Production Organisation Approval lets us manufacture parts and sub-assemblies to approved design data and release them with EASA Form 1. The terms of approval list production category C2: metal and non-metal construction and cable harnesses. That covers the custom instrument panels, wiring harnesses and sub-assemblies we build for installations.

The terms of approval name Letecká 1723, Kunovice as the production location.

EASA ADOA: alternative procedures to DOA

EASA.AP496/AIR TEAM service, s.r.o.

EASA has verified that AIR TEAM service can design Supplemental Type Certificate changes. The approved cases cover changes to small and large aeroplanes, sailplanes, light sport and very light aircraft, and small and large rotorcraft, related to the installation of avionics equipment, special mission equipment, electrical systems and cabin interiors with their structures and systems. The scope was extended to CS-29 helicopters in Issue 2.

AIR TEAM service writes the design data, and EASA approves each change.

EASA Part-21J: design organisation approval

EASA.21J.849/Held within the AIR TEAM group

The group's Part-21J design organisation approval for STCs, modifications and interiors. Design work runs at AIR TEAM Engineering, with its design office at Žemdirbių g. 22A, Lapės, LT-54436 Kaunas district, Lithuania. We confirm the certificate on request.

Military Part-145

CZE.145.1004/AIR TEAM service, s.r.o.

Approval by the Czech Ministry of Defence to maintain military aviation products and parts. The certificate is published above. The scope is defined in the Maintenance Organisation Exposition-M, chapter 1.9.

FAA repair station

5R2Y718D/AIR TEAM service, s.r.o.

FAA repair station certificate with limited ratings for radio, airframe, instrument and accessories. We confirm the current ratings on request.

Manufacturer authorisations

A dealer authorisation is the manufacturer's own statement of what we may sell, install and support, alongside our approvals.

Garmin Aviation

Platinum Dealer

Authorised dealer for sales, installation and maintenance of Garmin avionics.

Collins Aerospace

Authorised Business and Regional Systems Dealer

Authority to sell Collins products and to perform flight line maintenance and installation services for products where the required training is completed. The letter is shown above.

BendixKing

Authorised dealer

Authorised dealer for BendixKing avionics.

Need to verify an approval?

Send us the approval number and the aircraft or work you have in mind. We confirm scope, current status and the entity that issues the release, and we support customer and authority audits.